Instructions for Use of Car Lift

A car lift is an essential piece of equipment for car maintenance, basically a must for every car, and it may be used even for novice car maintenance. Whether the vehicle is replacing the spare tire or doing maintenance in the repair workshop, we will use the lifting equipment to lift the car, but some people still do not understand the operation and use of the car lift. Here, we will introduce you to the car lift and the operation steps of the lift. I hope everyone can learn how to use the car lifts correctly.

Here is the content list:

l Preparation before car lift

l Prevention of cars on a car lift

Preparation before car lift

A car lift is often used for car maintenance, such as chassis repair, oil change, tire change, etc. Car lifts can be divided into single-column, double-column, four-column, and scissor lifts according to function and shape. The following are the most commonly used methods of scissor car lift. First, turn on the power knob of the hoist, then lower the hoist to the lowest position, push the swing arm to extend straight to both sides, to facilitate the vehicle to enter this position, then drive the vehicle to a suitable position, adjust the vehicle so that the center of gravity of the vehicle is fully Probably near the center of the car lift. Then pull down the parking brake and park the vehicle, slowly turn the swing arm and tray into place on the vehicle, adjust the length of the swing arm and extend it into place.

Prevention of cars on a car lift

Adjust the tray of the car lift to a suitable height, keep the vehicle level, and align the tray slot with the position of the body support point accurately. For the four support points of the car lift, this position is usually reinforced with steel plates, which can allow the car lift to bear more force. Press the up button to lift the vehicle until the tires are off the ground, shake the vehicle, and make sure the vehicle is stable. Then start the winch, let the fulcrum contact the vehicle, recheck the fulcrum position, and after confirming that it is correct, lift the vehicle 300mm off the ground. When the car lift lifts the vehicle, the staff should leave the vehicle and it is strictly forbidden to stand under the elevator. When raised to the desired height, the safety latch must be inserted to ensure safety and reliability before starting operations under the vehicle. Before lowering the vehicle, lift the vehicle, open the safety latch, and then press the lower button to lower the vehicle slowly until the lift arm is at the lowest position, remove the lift arm, and drive out of the vehicle.

If you are interested in our Car lift products or have other needs, please feel free to contact us.

 Our official website is www.jintuoautotech.com. Our cost-effective products will bring you a better experience. We uphold the spirit of integrity, professionalism, and innovation, win trust with quality and achieve the future with the brand. We pursue sustainable management and constantly transform advanced technology and experience at home and abroad into competitive products to meet customer needs.