Points of Purchase of Car Lift

Many people want to buy a car lift but have no idea where to start. Next, let's take a look at the main points of buying a car lift.

Here is the content list:

l Car lift location and device

l Installation of entrances and exits and car lift passages

l Car lift safety device

Car lift location and device

The first is the position of the car lift. When installing the car lift, it should be in the best condition to fully utilize the function of the parking lot, not hinder the entry and exit of the car, and have the effect of smoothly and safely keeping the car. Then in terms of drive, most of the power of the car lift can be a hydraulic workstation brake and electromagnetic reverse flow valve. Lifting guide and guide rail: To ensure the smooth operation of the car lift, the lifting guide rail should ensure the accuracy of installation.

Installation of entrances and exits and car lift passages

Between the entrance and exit of the car lift and the road ahead, a distance of two-vehicle lengths should be reserved, or space for setting a turntable should be reserved, but a car lift with a separate entrance and exit should reserve a space for one vehicle length on the entrance side. When the car enters and exits the car lift, and does not drive out in the way of reversing, in principle, a turntable should be set up. The width of the vehicle entrance and exit should be more than 0.5M greater than the maximum width of the vehicle to be transported, and not less than 2.25 meters, and its height should be more than 1.8 meters, and not less than the height of suitable parking vehicles plus 0.1 meters. The scissor car lift dimension design of the lift passage should be aimed at the safe operation of the car lift, and the distance between the car carrier and the edge of the ground at the entrance and exit should be less than 4CM. The depth of the foundation pit of the hydraulic direct push car lift has nothing to do with the rated speed and should be more than 1.2 meters.

Car lift safety device

A very important point when purchasing a car lift is the emergency stop device. The emergency stop button means that if an emergency occurs during operation, pressing the emergency stop button will cause the system to stop in an emergency until the fault is eliminated. The shock absorber is installed in the pit to reduce the shock when the car lift descends. The limit switch is to prevent the car lift from reaching the top or exceeding the operating area. The limit switch should be set up, and the car lift can automatically stop when it reaches the limit position. The hydraulic safety valve is when the oil pipe bursts or is suddenly unloaded, the safety valve automatically closes so that the truck board cannot fall and avoid accidents. A device to prevent the motor from idling, and a device to adjust the leveling device for adjusting the lowering of the carrier.

For more Car lift-related questions, please contact us. Years of accumulated R & D and production experience, to provide you with more product services and technical support! Our official website is www.jintuoautotech.com. Our company adheres to the service tenet of "customer first", implements the service of honesty and customer first, and takes "excellent quality, multi-faceted technical support, accurate delivery" as the business philosophy, with mutual benefit and common development as the goal. We wholeheartedly provide our friends with high-quality products and services.