Precautions for The Use of Car Lift

The application of a car lift solves the problem of car maintenance. However, many mechanics in repair shops do not strictly follow the safety operation rules of car lifts when using car lifts, such as overloading, mistake, and not paying enough attention to safety. The way of operation leads to the occurrence of safety accidents. Therefore, the safety of car lifts and lifting platforms has always been a topic that people cannot afford to worry about. Choosing a high-quality car lift is an important condition for safe use. So, what should we pay attention to when using a scissor car lift?

Here is the content list:

l Check before use

l Pay attention when working

Check before use

Car lifts should develop the habit of checking the equipment every day in use, and find problems in time (such as loose screws, different tightness on both sides of the wire rope, etc.), clear, restore, and then use again. In addition, attention should be paid during maintenance, try to use the accessories provided by the original factory of the equipment, and do not replace them at will. Before the car drives onto the lift, the passageway should be cleared, and the lift arm, connector, axle support, etc. should not be driven or hit to prevent damage to the car lift or the car; other obstacles should be prohibited in the car lift area, which will affect the car lift work.

Pay attention when working

Moreover, the load of each car lift is limited, and it is marked on the factory label. Therefore, overloading or partial loading should be prohibited during use. Whether it is overloading or eccentric loading, there will be great danger, and everyone must pay attention to this; when lifting the car, no one is allowed in the car, and any unrelated personnel should stay away from the equipment during lifting and operation; on the car lift care should be taken when carrying the vehicle. Position the lift's support to the lift contact points recommended by the car manufacturer. It should be noted that some parts of the car will cause a sharp change in the center of gravity due to the different moving or installation positions, which will lead to instability when the car is lifted. Therefore, only when the supporter is in close contact with the bearing point on the car can the lift is raised; the car lift can only be lifted to the required working height after careful inspection of the tightness of the place where the car lift is in contact with the car. Before the lift descends, all obstacles under the car should be removed, and no one is allowed to stand under the car. Before lowering, the locking device should be released before lowering safely.

Our official website is www.jintuoautotech.com. If you work with Car lift or want to know more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone.