English
Pусский
Español

You are here: Home » News » Car lift » Car Lift Operating Procedures And Classification

Car Lift Operating Procedures And Classification

Publish Time: 2022-08-18     Origin: Site

The car lift is a piece of equipment used to lift cars in the process of car maintenance, the car is driven to the car lift station and through manual operation, the car can be lifted to a certain height to facilitate car maintenance. Here are some answers.


Here is the content list:

l Introduce the operating procedures of the Car lift.

l What are the classifications of Car lifts?


Introduce the operating procedures of the Car lift.

First, before using the car lift, you should clear the equipment and debris in the vicinity of the car lift, and check whether the operating handle is normal. Second, the operating mechanism should be sensitive and effective, and the hydraulic system should not be allowed to crawl. Third, when supporting the car, the four supporting corners should be on the same plane, and adjust the height of the supporting corner rubber pad so that it touches the supporting part of the vehicle chassis. Fourth, when supporting the vehicle, the vehicle should not be supported too high, and the four brackets should be locked after being supported. Fifth, to be lifted into the vehicle, the car lift support block should be adjusted to move right to the lifting point specified in the vehicle type. Sixth, after lifting personnel leaves the vehicle and the car lifts to the required height, we must insert the insurance locking pin, and ensure safety and reliability before starting the undercarriage work. Seventh, except for low maintenance and minor repairs, other heavy work should not be carried out on the scissor car lift. Eighthly, the car lift must not be lifted or lowered frequently. Ninth, the lift should be steady and the landing should be slow when supporting the car. Eleventh, if you find that the operating mechanism is not working, the motor is not synchronized, the bracket is not level or the hydraulic part is leaking oil, you should report the problem to the authorities in time and should not operate with illness. Twelfth, after the operation, you should remove the debris and clean around the car lift to keep the site tidy. Thirteenth, regularly (half a year) remove the car lift cylinder water, and check the oil volume, the oil volume is insufficient should be timely refilled with the same grade of pressure oil. At the same time, the lubrication, car lift transmission gears, and seam strips should be checked.


What are the classifications of Car lifts?

Car liftscan be divided into four-wheel alignment types and flat types according to the function, and above-ground types and underground types according to the different spaces occupied. The above-ground type does not require trenching and is suitable for any repair shop. Some floor slabs are not suitable for the installation of two-post car lifts and ordinary four-post car lifts, while this machine has a wide contact surface with the floor slab so that it can be installed on top of any floor slab that can be driven, solving the customer's site problem. The biggest advantage of the scissor car lift over the two-post and four-post car lifts is that it does not take up much space and is easy to use.


Our official website is www.jintuoautotech.com. If you work with car lift or want to know more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone. Our mission is to provide the best service to our clients and focus on building long-term partnerships that we believe will lead us to a win-win situation. We are committed to putting customers first, and we will be loyal, sincere, and responsible when we step into the global door and window business.


About Us

YANTAI JINTUO AUTOMOBILE TECHNOLOGY CO.,LTD. was founded in 1996, which is located in Yantai city. It specializes in auto body repair system, auto lift and tire equipment with technology development, product development, production, sales and service.

Contact Us

  No. 159, Fuxin Road, Yantai, Shandong, China
 +86-18863862288
 +86-535-6398226
Wechat\WhatsApp: +86-18863862288
   helenameng@jintuoautotech.com
Copyright © 2022 Yantai Jintuo Automobile Technology Co.,Ltd. All rights reserved. Supported by Leadong | Sitemap