How To Choose A Tire Changer？

A tire changer is an automobile maintenance equipment that AIDS in disassembling and installing automobile tires during automobile maintenance. So that the automobile maintenance process can be more convenient and smooth to remove the tire, at present, there are many kinds of tire removal machines, so you need to pay more attention when choosing. According to the user type, the tire changer is divided into motorcycle tire changer, car tire changer, truck tire changer, engineering car tire changer, and other types. The following is a detailed introduction to how to choose a tire changer. 

Here is the content list:

 Motor power

 Running noise

 Tire mounting head

Motor power

Pay attention to the rated power of the tire changer. The greater the power, the stronger the working stability. The power of tire removal machinery is generally more than 1000W. To reduce costs, some manufacturers use motors of about 800W, and their working stability is much worse. When buyers choose and buy, they can disassemble the side cover to see the rated power of the motor. The motor should have little noise and no obvious vibration when working.

Running noise

The noise of the tire changer should be low during operation, and there is no obvious vibration of the tire changer under load. The reducer is the tire changer machine transmission power reduction device. Because the AC motor speed is generally above 100r/min, it must be reduced to about 100r/min through the reducer before it can work normally. Reducer is usually made of special materials, alloy materials, and transmission must be low noise and have good balance performance. Some small tire changer machine production enterprises use poor quality hard alloy casting reducers, the working noise and load should be paid more attention.

Tire mounting head

The quality of the tire dismantling head is also directly related to the quality of the tire changer. At present, there are two kinds on the market: one is made of high-quality stainless steel material, the price is more expensive, and the other is made of cast iron material, the price is relatively low, which is easier to identify when choosing. A high-quality stainless steel tire dismantling head, its arc design curve is more scientific, can be used for many years, not easy to deform, loading and unloading of tires is smooth, and protect the rim, the tire is not damaged. And the poor tire dismantling head is not the same, the appearance is rough, the curved curve design is not reasonable, the tyre changer machine loading and unloading is not smooth, easy to be deformed after repeated using, and easy to scratch the tire and rim. Therefore, in the selection of a tire mounting machine to load and unload tires on site, to verify the advantages and disadvantages of disassembly.

Therefore, the purchase of a tyre changer can be considered from the above several aspects.

YANTAI JINTUO AUTOMOBILE TECHNOLOGY CO., LTD. is a high-tech enterprise with rich production experience, you may consider buying our products. We can provide high-quality products and professional services.